I spent some time on legged locomotion back in the 1990s. It was clear then that you wanted torque control, and I did some work on the theory for that, trying to solve it from first principles, not machine learning. Got some nice theory and a patent out. But the parts just weren't there to build such things. As the article points out, the key to this is motor back-drivability. The final drive has to survive shock loads, and it has to dump forces into the motor, where the magnetic fields can take it. As I've quoted before, "you cannot strip the teeth of a magnetic field", a comment from early General Electric locomotive sales. (Locomotives are Diesel-electric, not Diesel with a clutch and shifting gearbox, because the clutch required is huge. Yes, it's been tried.)
That's something few areas of engineering cared about, with the exception of aircraft flight control systems with mechanical backup.
Pneumatic actuators looked promising, but proportional dynamic valves were big, heavy, and about $1000 each. Linear motors (not ball screws) looked like the coming thing back then, as 10:1 power/weight ratio had been achieved.
But that technology never got much further, and Aura, the biggest player, collapsed in a financial scandal. Series elastic actuators were (and still are) a race between the spring compressing and the ball screw motor starting up. Hydraulics were too clunky; Boston Dynamics built a 400 pound mule, but the Diesel power pack never worked.
Direct drive pancake motors were used by some SCARA industrial robots, but those were too big for leg joints.
I thought someone would crack the direct drive problem eventually, but nobody ever did. We're still stuck with some gear reduction.
Some of the exotic ideas for muscles mentioned in this article go back that far. The McKinney muscle is old, and not too useful. There was some interest in electrorheological fluids, fluids whose mechanical properties change when an electric field is applied. That didn't become useful either. Shape-memory alloys were a dead end; liquid cooling can overcome the slowness problem, but not the inefficiency problem. Everybody went back to good old electric motors, although they became 3-phase AC instead of DC. It helped that the drone industry made 3-phase motors and their controllers small, cheap, and powerful.
Academic robotics groups were tiny. MIT and Stanford had less than a dozen people each.
Progress required hundreds of millions of dollars for all that custom engineering and R&D. The level of effort just wasn't there. Nor would throwing money at the problem prior to machine learning have led to useful products.
It's impressive what's been accomplished in the last five years. It took a lot of money.
Silly question maybe, but didn’t Boston Dynamics have videos of bipedal robots doing acrobatics / running ~7/8 years ago? Kinda looked like they “solved” locomotion then
Their approach required pre-computation and simulation before execution. If you watch their videos carefully, you can see the advance planning work on some of the screens.
I can understand pre-computation making the “software” problem of locomotion easier, but how does it help with the hardware problems laid out in the article, ie repeated very high load over a very short amount of time?
overclocking a CPU might make it seem that you solved something and gotten better performance, but sooner or later it breaks down, as I read the article I believe that pre-computation essentially allows you to "overclock" the hardware, and make it seem that you have solved the problem of locomotion when what you have actually done is made something that looks impressive for a very much shorter of time than is usually used to calculate what the hardware can bear.
BD used hydraulics for a long time. Works, but inefficient. You have to carry the actuators, the tank, probably a hydraulic accumulator, the pump, valves, and the power source for the pump. That's why BD's machines were so big. Someone at Google said "We need to have a conversation about hydraulics", and the dog robot in 2019 was the first all-electric machine.
BD was under business pressures, and a computerized automaton doing baked ninja back-flips with servos is more impressive than inexpensive FK/IK demos dead-lifting 1000lbs. Google broke that company with their opinions.
Even if private labs have a viable platform solution, people won't care unless they can clone it for free. Not a lot of incentive for design change, but building Kryten 2X4B-523P would be hilarious. =3
Nobody has a problem with companies using AI to edit articles, create images.
But when even the writer is an AI persona, the trust factor gets destroyed.
You evaluate the merits of the content? From a high-level systems pov, the article is largely correct, even if some details might be missed / simplified
Even the video is generated. The whole thing is just slop upon slop, I'm amazed that it got to the top of the front page here. I suppose it's a genuinely impressive amount of fakery all integrated together.
There are a few of these being sold as products: AGIBOT has some models like that (eg https://www.agibot.com/products/A2_W). One argument that could be made for legged robots is that these wheeled ones can only work in wheelchair-accessible spaces. Legged robots can also balance themselves dynamically: a wheeled robot may tip over if anything violates its static balance, eg. carrying a load high up and going through a steep incline, though I guess having the torso be tiltable as in https://www.agibot.com/products/G2 addresses that.
Legged robots overall have more implementation complexity, spend energy just to idle standing up, but can go over much more varied terrain provided the controller is good enough. There are ways to adapt wheeled bases to different terrains (eg. larger wheels, whegs, RHex, rocker-bogies) but we know how to use legs to locomote over many terrains from personal experience, while the perfect wheeled/non-legged locomotion system perhaps remains to be designed.
There's also the way robotics is going toward data-driven methods, which in some forms (ie. imitation learning) require human teleoperation data. Here having the robot mimic the human form makes the mapping from human joints to robot joints easier (compared to other morphologies where you'd need to figure out how to best approximate a human motion with the joints/joint limits your robot has, though this is not impossible).
Presumably for outdoors or home deployment. The world is designed for bipedal locomotion, and human bipedal locomotion is designed for the world.
But yes, for a factory or commercial environment it doesn't make too much sense. It would be cheaper to adapt the environment, and many commercial environments are already designed to be accessible for wheelchair users anyway.
> Besides that, our entire technology is based on the human form. An automobile, for instance, has its controls so made as to be grasped and manipulated most easily by human hands and feet of a certain size and shape, attached to the body by limbs of a certain length and joints of a certain type. Even such simple objects as chairs and tables or knives and forks are designed to meet the requirements of human measurements and manner of working. It is easier to have robots imitate the human shape than to redesign radically the very philosophy of our tools.
It seems that he wrote that in a book published in 1953, but it's weird, I find, that he was imagining a robot driving a car. I would have thought he would have imagined that cars would become robots well before there would be humanoid robots wanting to drive them. So by the time you have a humanoid robot wanting to drive a car it's just one robot talking to another robot, electronically. And knives and forks are for eating, which humanoid robots presumably don't need to do, and is it likely that humanoid robots will need chairs in the same way that humans do? Altogether, a bad set of examples, I find. Perhaps the thesis would be more convincing with some better examples.
I need to get on to one of the prediction markets.
I’m willing to bet we’ll have a humanoid robot that can drive a car before we have level 5 autonomous vehicles.
And by can drive a car I mean a general purpose humanoid robot that can do basic household chores like move the car and wash it with a foaming brush and a hose.
I don’t mean the robot will be capable of sitting in any regular car and doing level 5 autonomous driving.
So you’re wanting to bet that we’ll get humanoid robots capable of driving a dumb car at L4 before we get cars capable of L5? When we have no humanoid robots driving cars, and many L4 cars driving around? I’ll take that!
1. Asimov wrote that because he needed robots to be indistinguishable from humans for plot reasons.
2. We do 99% of our tool use with our arms and hands. We are already very good at building robot arms. We are getting better at robot hands. We can build robot legs, but they're very expensive and they pose a major safety risk for the robot itself and surrounding humans (because the robot can fall if there is a failure). For most applications, why not just put biomimetic hands and arms on a rolling base?
Of course, all this humanoid robotics research is still useful because if you can build a fully humanoid robot you can trivially build a torso-on-rolling-base robot. I sort of suspect that most of the humanoid robotics companies already know that the vast majority of their sales will be in that category.
It's 100% a HMI and moving costs to the other end of supply chain.
We can have optimized automation in warehouses/logistics, but if you talk to any site manager you learn very quickly that no one wants any downtime or impact to their operation to introduce new machinery or optimize traffic, etc. If it is not built with that from the start it's very hard to introduce it later on unless there is a very clear deployment path and cost structure.
And boy, robotics currently has any of those today. Sure, move those billions in to R&D. Time will tell.
You can still have a humanoid robot that looks very different from an actual human (and most robots from Asimov's novels were of that kind, although one of the main characters wasn't - https://en.wikipedia.org/wiki/R._Daneel_Olivaw).
Ok, so maybe a robot with wheels could solve most tasks, but it would still be severely limited: couldn't climb stairs (which would make it unsuitable as a domestic robot in a house or multi-storey flat), couldn't drive a car, truck or any other vehicle designed for humans etc.
Sure, there are already robot vacuum cleaners, but I somehow fail to imagine how (a) specialized robot(s) that can e.g. sort your used laundry, wash it, dry it, iron it (if necessary), fold it and put it back into the cupboard would look like?
Probably a dumb question, because I know nothing about robotics, but:
> The "Zero RPM" Problem
> When a robot bends its knees to stand, the motor must constantly fight gravity. There is no skeletal structure to lock against. To an electric motor, holding a static load—known as stall torque—is the most punishing state possible.
Why not just add some kind of brake that can fully or partially lock the joint?
Brakes are being added to actuators but they're more useful for static holds / locking than dynamic balancing. Standing even in humans is a dynamic balancing activity.
This is AI slop and the article contains some of the worst illustrations I have ever seen. Most do not make any sense mechanically. Here are the worst ones:
- The "orbiting threaded rollers" in figure 6 are not meshing with anything (not that they could, since they are orientated in the wrong direction).
- The ball of the ball screw in figure 7 deforms the screw and the roller screw "meshes" with a flat surface.
- The guy on the pogo stick in figure 14 is jumping himself rather than putting his feet on the stands of the pogo stick.
- In figure 16, a key penetrates the elastomer skin of the optical tactile sensor, destroying it.
Is it? Now I feel bad for having posted it. I mean, I know some stuff but not enough to judge over all the content in this article. It's unfortunate but from glancing over I thought it was a comprehensive and useful resource. I guess I will just give up on the Internet or something like that.
« Rotary Actuators (The "Reflected Inertia" Trap) », « Quasi-Direct Drive (QDD) — The "Cheetah" Approach «
The pattern ‘something — The « metaphor » <qualifier> ‘ screams Gemini. Gemini seem completely unable to generate a section title that doesn’t follow this annoying pattern.
Actually, most videos seem to be real, run-of-the-mill showcases of various actuators the company sells. However, the owner seems to have added quite stupid AI-generated preview images lately.
Asking: As gpugreg remarked[0], this is AI slop to the point that it is impossible to trust anything from this article/blog post. As such, I flagged the submission.
- I wonder, is it possible to give a reason to the flag?
- Is flagging the submission without comments the right way to go?
For me, it is important that slowly but surely it goes through that AI slop is not what is accepted here on HN. Yes to have whatever LLM helping with grammar, spelling, etc. but the content should not be the output of a one shot "write me a blog post about humanoid robot actuators" prompt.
Its completely impossible to trust an article when half the diagrams have serious issues and headlines are worst slop indicators. I am sure the author is knowledgeable and spend some time on this. But please please, with butter, please, either spend the last 10% to get rid of these issues or just don't publish it! Keep it in your ai research gallery or if you want to publish that gallery as ai research?
Why these screws are used instead of just threads? Because rolling friction is lower than sliding friction. You can use less or more of them trading friction for shock resistance.
I really like the idea of using two series elastic actuators in parallel on the same joint. This way motors acting in opposite direction can pre-tension the springs making the leg stiffer or softer. And if a lot of strength is needed they can act in the same direction summing their forces.
It should be fairly straightforward to control dynamically so you can use pretty much any motor and gearbox.
AI was clearly heavily used in the making of this article, and I almost dismissed it as slop. But after reading it I think there's enough correct information here for it to be useful as a general overview of the problems in the space.
I believe that bad/wrong explanations are actually much worse than no explanations.
Many figures seem to be either missing key information (e.g. Fig. 5: the elliptical deformation is not shown - a human artist would have created a very different figure to explain the concept) or plain wrong (Fig. 6: the threaded rollers have the wrong orientation, Fig. 7: the ball is much too large for the bearing and the whole figure seems nonsensical at first glance).
And if the author did not spot these obvious problems with the figures, they either have no clue, accept sloppy work, or didn't even read the article they generated. That article is not really good advertising for the company's products.
(That the link behind the author's name leads to their Wikipedia article which seems to be a revised copy of the CV on their website is interesting, too.)
TLDR: we don't have the actuators required to make humanoid locomotion work reliably.
Also: something every human actually kind of knows. You need to take impacts on muscles, not on mechanical connections. Even if we had the actuators required, you also need perfect control. The only way actuators can work this well is if they properly predict the impacts so that the power of the motor ("the magnetic field") can absorb nearly all the impact. If you try to take the impacts even on human bones (that are very solid and self-repairing) they will break surprisingly quickly.
My opinion is that the need for high reduction is only because we can't have high voltage on the motors. If we either had very small distances between the magnets and electrical wires (think micrometers), or we have voltages in the 100s to 1000s of volts, we don't have to make this poisoned choice. (in a way, VERY small distances between magnets and wires is how human and animal muscles do it. But they go all the way down to sub-10 nanometers)
The power of money.
I spent some time on legged locomotion back in the 1990s. It was clear then that you wanted torque control, and I did some work on the theory for that, trying to solve it from first principles, not machine learning. Got some nice theory and a patent out. But the parts just weren't there to build such things. As the article points out, the key to this is motor back-drivability. The final drive has to survive shock loads, and it has to dump forces into the motor, where the magnetic fields can take it. As I've quoted before, "you cannot strip the teeth of a magnetic field", a comment from early General Electric locomotive sales. (Locomotives are Diesel-electric, not Diesel with a clutch and shifting gearbox, because the clutch required is huge. Yes, it's been tried.) That's something few areas of engineering cared about, with the exception of aircraft flight control systems with mechanical backup.
Pneumatic actuators looked promising, but proportional dynamic valves were big, heavy, and about $1000 each. Linear motors (not ball screws) looked like the coming thing back then, as 10:1 power/weight ratio had been achieved. But that technology never got much further, and Aura, the biggest player, collapsed in a financial scandal. Series elastic actuators were (and still are) a race between the spring compressing and the ball screw motor starting up. Hydraulics were too clunky; Boston Dynamics built a 400 pound mule, but the Diesel power pack never worked. Direct drive pancake motors were used by some SCARA industrial robots, but those were too big for leg joints. I thought someone would crack the direct drive problem eventually, but nobody ever did. We're still stuck with some gear reduction.
Some of the exotic ideas for muscles mentioned in this article go back that far. The McKinney muscle is old, and not too useful. There was some interest in electrorheological fluids, fluids whose mechanical properties change when an electric field is applied. That didn't become useful either. Shape-memory alloys were a dead end; liquid cooling can overcome the slowness problem, but not the inefficiency problem. Everybody went back to good old electric motors, although they became 3-phase AC instead of DC. It helped that the drone industry made 3-phase motors and their controllers small, cheap, and powerful.
Academic robotics groups were tiny. MIT and Stanford had less than a dozen people each. Progress required hundreds of millions of dollars for all that custom engineering and R&D. The level of effort just wasn't there. Nor would throwing money at the problem prior to machine learning have led to useful products.
It's impressive what's been accomplished in the last five years. It took a lot of money.
Silly question maybe, but didn’t Boston Dynamics have videos of bipedal robots doing acrobatics / running ~7/8 years ago? Kinda looked like they “solved” locomotion then
Their approach required pre-computation and simulation before execution. If you watch their videos carefully, you can see the advance planning work on some of the screens.
I can understand pre-computation making the “software” problem of locomotion easier, but how does it help with the hardware problems laid out in the article, ie repeated very high load over a very short amount of time?
overclocking a CPU might make it seem that you solved something and gotten better performance, but sooner or later it breaks down, as I read the article I believe that pre-computation essentially allows you to "overclock" the hardware, and make it seem that you have solved the problem of locomotion when what you have actually done is made something that looks impressive for a very much shorter of time than is usually used to calculate what the hardware can bear.
on edit: apologies if my analogy is not the best.
BD used hydraulics for a long time. Works, but inefficient. You have to carry the actuators, the tank, probably a hydraulic accumulator, the pump, valves, and the power source for the pump. That's why BD's machines were so big. Someone at Google said "We need to have a conversation about hydraulics", and the dog robot in 2019 was the first all-electric machine.
plenty BD clips of old atlas include oil lines bursting and showing the room with oil.
it's indeed a mess.
BD was under business pressures, and a computerized automaton doing baked ninja back-flips with servos is more impressive than inexpensive FK/IK demos dead-lifting 1000lbs. Google broke that company with their opinions.
Even if private labs have a viable platform solution, people won't care unless they can clone it for free. Not a lot of incentive for design change, but building Kryten 2X4B-523P would be hilarious. =3
I feel like the loads would suit electrostatic motors quite well if those could be made appropriately compact.
How can we trust this article or the company if the writer/so-called chief engineer decides to hide himself behind an AI avatar?
From what I can understand this is the Robbie Dickson in question: https://www.huffpost.com/entry/lessons-from-a-serial-ent_b_9...
Nobody has a problem with companies using AI to edit articles, create images. But when even the writer is an AI persona, the trust factor gets destroyed.
You evaluate the merits of the content? From a high-level systems pov, the article is largely correct, even if some details might be missed / simplified
I think at very least, the diagrams are AI generated too.
> https://cdn.shopify.com/s/files/1/0554/0567/4694/files/strai... The middle component has teeth on the inside half way round, should be smooth on the inside.
> https://cdn.shopify.com/s/files/1/0554/0567/4694/files/inver... 4 of the 5 orbiting threaded rollers are perpendicular to the screw thread, so wont do anything.
> https://cdn.shopify.com/s/files/1/0554/0567/4694/files/ball-... Ball doesnt fit in the screw thread, just 'squashed' to make it fit?. Screw thread isnt consistent.
> https://cdn.shopify.com/s/files/1/0554/0567/4694/files/stiff... Classic 3 interlocked gears.
> https://cdn.shopify.com/s/files/1/0554/0567/4694/files/optic... Has the elastomer been ripped when the key was inserted?
> https://cdn.shopify.com/s/files/1/0554/0567/4694/files/biolo... Another gearbox that doesnt do anything...
The rest of the website seems filled with just as much slop too...
I wouldn't be surprised if article is actually AI generated summary from several sources.Guided by human.
It's a new phenomena. Recently got a book on agentic AI which looks like OpenAI docs with added generated water.
Check out opensource actuator for robots.
Opentorque actuator
https://www.gabrael.io/new-page
https://github.com/G-Levine/OpenTorque-Actuator
Why the AI "engineering expert"? Seems to take some credibility away from what otherwise could be an interesting and informative read.
Yeah I couldn't get past so many issues in the AI generated illustrations. Not useful at all when they are completely wrong.
Even the video is generated. The whole thing is just slop upon slop, I'm amazed that it got to the top of the front page here. I suppose it's a genuinely impressive amount of fakery all integrated together.
right
I simply do not understand why you would ever prefer a fully humanoid robot as opposed to a humanoid torso on some other locomotion system.
There are a few of these being sold as products: AGIBOT has some models like that (eg https://www.agibot.com/products/A2_W). One argument that could be made for legged robots is that these wheeled ones can only work in wheelchair-accessible spaces. Legged robots can also balance themselves dynamically: a wheeled robot may tip over if anything violates its static balance, eg. carrying a load high up and going through a steep incline, though I guess having the torso be tiltable as in https://www.agibot.com/products/G2 addresses that.
Legged robots overall have more implementation complexity, spend energy just to idle standing up, but can go over much more varied terrain provided the controller is good enough. There are ways to adapt wheeled bases to different terrains (eg. larger wheels, whegs, RHex, rocker-bogies) but we know how to use legs to locomote over many terrains from personal experience, while the perfect wheeled/non-legged locomotion system perhaps remains to be designed.
There's also the way robotics is going toward data-driven methods, which in some forms (ie. imitation learning) require human teleoperation data. Here having the robot mimic the human form makes the mapping from human joints to robot joints easier (compared to other morphologies where you'd need to figure out how to best approximate a human motion with the joints/joint limits your robot has, though this is not impossible).
Presumably for outdoors or home deployment. The world is designed for bipedal locomotion, and human bipedal locomotion is designed for the world.
But yes, for a factory or commercial environment it doesn't make too much sense. It would be cheaper to adapt the environment, and many commercial environments are already designed to be accessible for wheelchair users anyway.
Isaac Asimov already explained that better than I could (https://www.reddit.com/r/asimov/comments/pm84ud/why_robots_a...):
> Besides that, our entire technology is based on the human form. An automobile, for instance, has its controls so made as to be grasped and manipulated most easily by human hands and feet of a certain size and shape, attached to the body by limbs of a certain length and joints of a certain type. Even such simple objects as chairs and tables or knives and forks are designed to meet the requirements of human measurements and manner of working. It is easier to have robots imitate the human shape than to redesign radically the very philosophy of our tools.
It seems that he wrote that in a book published in 1953, but it's weird, I find, that he was imagining a robot driving a car. I would have thought he would have imagined that cars would become robots well before there would be humanoid robots wanting to drive them. So by the time you have a humanoid robot wanting to drive a car it's just one robot talking to another robot, electronically. And knives and forks are for eating, which humanoid robots presumably don't need to do, and is it likely that humanoid robots will need chairs in the same way that humans do? Altogether, a bad set of examples, I find. Perhaps the thesis would be more convincing with some better examples.
I need to get on to one of the prediction markets.
I’m willing to bet we’ll have a humanoid robot that can drive a car before we have level 5 autonomous vehicles.
And by can drive a car I mean a general purpose humanoid robot that can do basic household chores like move the car and wash it with a foaming brush and a hose.
I don’t mean the robot will be capable of sitting in any regular car and doing level 5 autonomous driving.
So you’re wanting to bet that we’ll get humanoid robots capable of driving a dumb car at L4 before we get cars capable of L5? When we have no humanoid robots driving cars, and many L4 cars driving around? I’ll take that!
Perhaps the samples were chosen specifically as things the audience would have universal familiarity/understanding of thus making his point resonate.
He didn’t craft it for literal interpretation on HN 70 years in the future.
Right, but:
1. Asimov wrote that because he needed robots to be indistinguishable from humans for plot reasons.
2. We do 99% of our tool use with our arms and hands. We are already very good at building robot arms. We are getting better at robot hands. We can build robot legs, but they're very expensive and they pose a major safety risk for the robot itself and surrounding humans (because the robot can fall if there is a failure). For most applications, why not just put biomimetic hands and arms on a rolling base?
Of course, all this humanoid robotics research is still useful because if you can build a fully humanoid robot you can trivially build a torso-on-rolling-base robot. I sort of suspect that most of the humanoid robotics companies already know that the vast majority of their sales will be in that category.
It's 100% a HMI and moving costs to the other end of supply chain.
We can have optimized automation in warehouses/logistics, but if you talk to any site manager you learn very quickly that no one wants any downtime or impact to their operation to introduce new machinery or optimize traffic, etc. If it is not built with that from the start it's very hard to introduce it later on unless there is a very clear deployment path and cost structure.
And boy, robotics currently has any of those today. Sure, move those billions in to R&D. Time will tell.
You can still have a humanoid robot that looks very different from an actual human (and most robots from Asimov's novels were of that kind, although one of the main characters wasn't - https://en.wikipedia.org/wiki/R._Daneel_Olivaw).
Ok, so maybe a robot with wheels could solve most tasks, but it would still be severely limited: couldn't climb stairs (which would make it unsuitable as a domestic robot in a house or multi-storey flat), couldn't drive a car, truck or any other vehicle designed for humans etc.
Remember the Segway?
Its predecessor was a stair-climbing wheelchair: https://en.wikipedia.org/wiki/IBOT
One of the codenames for Segway was "Ginger", a reference to Ginger Rogers, because the codename for iBOT was "Fred Upstairs" (a pun on Fred Astaire).
Why not make a robotic chair? Why not build our environment out of specialized robots instead of using a hammer for everything?
Sure, there are already robot vacuum cleaners, but I somehow fail to imagine how (a) specialized robot(s) that can e.g. sort your used laundry, wash it, dry it, iron it (if necessary), fold it and put it back into the cupboard would look like?
Probably a dumb question, because I know nothing about robotics, but:
> The "Zero RPM" Problem
> When a robot bends its knees to stand, the motor must constantly fight gravity. There is no skeletal structure to lock against. To an electric motor, holding a static load—known as stall torque—is the most punishing state possible.
Why not just add some kind of brake that can fully or partially lock the joint?
Brakes are being added to actuators but they're more useful for static holds / locking than dynamic balancing. Standing even in humans is a dynamic balancing activity.
Complexity, weight, failure modes, wear, maintenance, support burden of legacy parts.
Also the brake components are never in the same plane as the drive components, so now you have additional forces to engineer for.
You need to keep balancing fast enough. I don't think a break would give you this agility.
This is AI slop and the article contains some of the worst illustrations I have ever seen. Most do not make any sense mechanically. Here are the worst ones:
- The "orbiting threaded rollers" in figure 6 are not meshing with anything (not that they could, since they are orientated in the wrong direction).
- The ball of the ball screw in figure 7 deforms the screw and the roller screw "meshes" with a flat surface.
- The guy on the pogo stick in figure 14 is jumping himself rather than putting his feet on the stands of the pogo stick.
- In figure 16, a key penetrates the elastomer skin of the optical tactile sensor, destroying it.
- The gears in figure 20 touch perpendicularly.
> - The ball of the ball screw in figure 7 deforms the screw and the roller screw "meshes" with a flat surface.
Really, it is hilarious. This will teach me a lesson or two.
Is it? Now I feel bad for having posted it. I mean, I know some stuff but not enough to judge over all the content in this article. It's unfortunate but from glancing over I thought it was a comprehensive and useful resource. I guess I will just give up on the Internet or something like that.
« Rotary Actuators (The "Reflected Inertia" Trap) », « Quasi-Direct Drive (QDD) — The "Cheetah" Approach «
The pattern ‘something — The « metaphor » <qualifier> ‘ screams Gemini. Gemini seem completely unable to generate a section title that doesn’t follow this annoying pattern.
- Figure 3 has "elboly actuators" for the elbow joints (zero hits on Google for the term).
Could it be just the illustrations? I'm not knowledgeable enough to judge the text contents.
Now that you mention it ... apart from the typo the style of the illustration has all marks of AI.
The YouTube channel linked is more of the same. Just the absolute worst slop
Actually, most videos seem to be real, run-of-the-mill showcases of various actuators the company sells. However, the owner seems to have added quite stupid AI-generated preview images lately.
Asking: As gpugreg remarked[0], this is AI slop to the point that it is impossible to trust anything from this article/blog post. As such, I flagged the submission.
- I wonder, is it possible to give a reason to the flag?
- Is flagging the submission without comments the right way to go?
For me, it is important that slowly but surely it goes through that AI slop is not what is accepted here on HN. Yes to have whatever LLM helping with grammar, spelling, etc. but the content should not be the output of a one shot "write me a blog post about humanoid robot actuators" prompt.
[0]: https://news.ycombinator.com/item?id=48005917
I also flagged it when I realized the video claimed to be someone it wasn't. Unacceptable in my mind.
I cannot un-see these left border hints, it's driving me crazy.
Its completely impossible to trust an article when half the diagrams have serious issues and headlines are worst slop indicators. I am sure the author is knowledgeable and spend some time on this. But please please, with butter, please, either spend the last 10% to get rid of these issues or just don't publish it! Keep it in your ai research gallery or if you want to publish that gallery as ai research?
AI that drew the diagram couldn't get it's neurons around how planetary screws in linear actuator should work.
Here's an actual schematic: https://ae-pic-a1.aliexpress-media.com/kf/Sd3fe9841e4ed4871b...
Why these screws are used instead of just threads? Because rolling friction is lower than sliding friction. You can use less or more of them trading friction for shock resistance.
I really like the idea of using two series elastic actuators in parallel on the same joint. This way motors acting in opposite direction can pre-tension the springs making the leg stiffer or softer. And if a lot of strength is needed they can act in the same direction summing their forces.
It should be fairly straightforward to control dynamically so you can use pretty much any motor and gearbox.
Do they run Doom?
AI was clearly heavily used in the making of this article, and I almost dismissed it as slop. But after reading it I think there's enough correct information here for it to be useful as a general overview of the problems in the space.
I believe that bad/wrong explanations are actually much worse than no explanations.
Many figures seem to be either missing key information (e.g. Fig. 5: the elliptical deformation is not shown - a human artist would have created a very different figure to explain the concept) or plain wrong (Fig. 6: the threaded rollers have the wrong orientation, Fig. 7: the ball is much too large for the bearing and the whole figure seems nonsensical at first glance).
And if the author did not spot these obvious problems with the figures, they either have no clue, accept sloppy work, or didn't even read the article they generated. That article is not really good advertising for the company's products.
(That the link behind the author's name leads to their Wikipedia article which seems to be a revised copy of the CV on their website is interesting, too.)
They should've left out figure 6. it adds very little and the screws are wrong.
Except we don't need 100% bipedal robots. Wheels are perfectly ok for majority of city work and factory floor.
Put the robot on rollerskates break the wheels for the occasional stair.
TLDR: we don't have the actuators required to make humanoid locomotion work reliably.
Also: something every human actually kind of knows. You need to take impacts on muscles, not on mechanical connections. Even if we had the actuators required, you also need perfect control. The only way actuators can work this well is if they properly predict the impacts so that the power of the motor ("the magnetic field") can absorb nearly all the impact. If you try to take the impacts even on human bones (that are very solid and self-repairing) they will break surprisingly quickly.
My opinion is that the need for high reduction is only because we can't have high voltage on the motors. If we either had very small distances between the magnets and electrical wires (think micrometers), or we have voltages in the 100s to 1000s of volts, we don't have to make this poisoned choice. (in a way, VERY small distances between magnets and wires is how human and animal muscles do it. But they go all the way down to sub-10 nanometers)