Looks very cool. One thing I have been looking for, which this doesn't seem to cover (at least I didn't see any mention of IPA in the model documentation), is a way to transcribe unknown languages phonetically, using the International Phonetic Alphabet to spell them (sound-based spelling rather than meaning-based spelling). I know several linguists doing research on minority languages (fewer than 10,000 speakers in some cases), which are small enough that they will never have enough effort made towards training language-specific models in that language.
Are there models I'm not aware of that are trained for this task? Taking audio in an unknown language, and rather than identifying the language, just transcribing the sounds to IPA? That would not be useful to most people, but it would be a Godsend to many, many linguists working with minority languages around the world.
We take a lot of shortcuts when speaking, it's actually much harder to transcribe phonemes than to transcribe words, even when aware of the language being spoken. Some models have been trained for the task (e.g. look at https://huggingface.co/spaces/KoelLabs/IPA-Transcription-EN ), but the error rate is really high.
There are, broadly, two kinds of audio recordings that linguists want to transcribe. One is native speakers telling traditional stories, where they're speaking naturally and taking the natural shortcuts (such as "wanna" and "gonna" in English). The other is native speakers reading words (or short example sentences) very carefully and distinctly, so that the linguist can listen to the recording over and over to learn how to pronounce the word right. In those recording, they'll say "want to" and "going to" rather than "wanna" and "gonna".
Thanks for the pointer; I'll check out that model and see if it handles the "slowly and carefully" type of recording better than the "natural speaking" type. (And depending on what kinds of errors the model makes, even the recordings where it makes errors can prove useful: for example, a linguist studying regional variations in speech would want the model to produce the IPA for "gonna" rather than "going to").
Dialects degenerate phonemes that would otherwise occupy identity relations between different utterances of the same "word" (word/concept mutable hyperobject as is the standard in any socially-relevant spoken language) which would be a bit of irony in this thought experiment since common knowledge dictates that more data samples must be present in the dataset (not less, as in rarely-spoken languages) to associate separate pronunciations of utterances representing the same underlying concept. However very-rarely-spoken languages probably don't have distinct dialects since so much focus is put on mutual intelligibility with the few members of the group that remain fluent in that language. It's not outside the realm of possibility that small speaking communities nonetheless fractionate into dialectical specialities but that seems increasingly unlikely as the fervor for preserving/recognizing dying languages increases, and global instant communication continues to become more commonplace.
Example: Schwabisch is wild and would be phonetically transcribed very differently from Hochdeutsch which is its ostensible language progenitor (technically more a cousin than an ancestor in the lineage of language evolution), but if the goal is merely to focus the model purely on phonetic transcription then you can add additional post-processing layers which map sounds to core concepts shared across dialects for actual translation. But I like your idea of interacting with the intermediate elements to familiarize yourself at least with the phonetic patterns, we humans are still thinkers enough to infer patterns of grammar and semantics from these building blocks just as we have done for the entire history of the species/lineage before written representations of language came along (relatively late -- evidence of script cropped up only once civilization had centralized to a sufficient degree to make economics non-local and non-trivial).
tl;dr the big words: it's not til you collect enough spoken samples of the dead(ish/dying) language being spoken that the local idiosyncracies are discovered, luckily linguists are smart enough to probably anticipate and certainly post-process language snippets to grasp the common structures for this or that given language.
> ... very-rarely-spoken languages probably don't have distinct dialects ...
That's true if you mean "very rarely spoken" literally, as in even the native speakers don't get to use it very often. But many languages aren't widely spoken (such as only in a certain geographical area, which sometimes is only a single village, or other times a small number of villages). But inside that area, they are frequently spoken. And you might be surprised how many of those small-geographic-area languages still have distinct dialects.
For example: my wife (a linguist) did her master's thesis on the pronunciation of a language with about 7,000 speakers, and identified how many distinct dialects there were. (Which is why I know a little bit about this). She recorded native speakers from all 13 (I think it was 13, but it might have been 14) villages where the language was spoken, and found five different dialects, which she grouped into two "main" dialects. (Think American vs British in the English language, with subdivisions into Midwest, New York, and New England accents and so on, and you'll have the right general idea — though these dialects were closer to each other in sound than Midwest vs New York). I'd have to go reread her thesis to give you any more details. But this was a language that was only spoken in a small geographic area, but it was frequently spoken, because that was the main language of those villages. (The country's official national language is what the kids learned in school, but some of the people, mostly those 60 years old or older, hadn't gone to school, because the first government school in their area was only built 60 years ago -- so they only spoke their minority language, and not the country's language, and their kids had to translate for them if they had to leave their village and go shopping in a major town).
I would love such a model. My wife's family is Iu Mien which is a sub group of the Dao/Yao Chinese ethnic minority. Mien is its own language but most speakers are essentially illiterate. I'm good with language but there simply isn't a course or any books for learning the language. Not much in writing to begin with given the high illiteracy rate. I would love to build a translation system - project Hail Mary style :)
FWIW someone wrote their PhD thesis on the Iu Mien language: https://opal.latrobe.edu.au/articles/thesis/An_Iu_Mien_gramm... It's not a textbook, but that doesn't mean you can't try to use it as a textbook. For example, there are some thoroughly-analyzed example texts. Also, the acknowledgments section mentions the Iu Mien Literacy Project, which has published a short course on the very basics, as it turns out: https://iumienliteracyprojects.com/resources/ I suspect the 925-page PDF contains some more hints to additional resources like that. :)
Unfortunately there are two sub groups of Iu Mien with somewhat different vocabulary as well - and my wife is from the other group. I had found this pdf document previously - thanks for the pointer! I'll see what I can do with it.
Largely this is out of scope for the library, mainly because I’m not aware of many models supporting this. but if there are models which support this would be happy to support
It sounds like the only way this would make sense is if such model knew the range of sounds it expects to "hear". There's a lot of possible sounds that IPA knows about, but world languages only use a fraction of them at once. Think English dark and light "l" (ball/light) or aspirated "p" (pin/spin) - some languages contrast them, while in english the difference is not meaningful.
Or maybe linguists are actually interested in having maximally faithful IPA representation and manually normalizing it? You are clearly way more knowledgeable about that topic than I, so I'm curious what you think.
The linguists I know are not necessarily a representative sample... but they're mostly interested in just that: maximally faithful IPA representation. They want to know if the speaker switches back and forth between aspirated p and unaspirated p on the same word, because that tells them something about the language — that aspirated consonants are not meaningful.
Linguists studying the sounds of a language, its phonology, often want to find "minimal pairs", words that differ by only a single sound. For example, din and tin in English. You record a native speaker saying both words, and telling you their meaning, and then you play back either recording A or recording B to other native speakers and ask them which word it is. If they can identify the word every time, then you've found two sounds that are meaningfully distinct in this language. (Some languages don't distinguish the d and t sounds, but English does). But if the native speakers go 50/50 on which word it is, or ask to hear it in a sentence for clarification because it could be two or three different words, then you've found a pair of sounds that this language does not distinguish. (Note that you're playing the words in isolation, because sentence context might make it obvious which one it is, e.g. you can't tell if an English speaker is saying their or there until you hear more words of the sentence).
So yes, the linguists that I know (who, again, are not necessarily a representative sample) are interested in as faithful an IPA representation as they can get, because that inconsistent transcription will give them many clues about the language. It still all has to be checked, because that switching back and forth between aspirated and unaspirated p (for example) could have been an artifact of a poor-quality microphone not picking up the aspiration, or a windy day causing aspiration sounds that the speaker never said, or the speech-to-text model making a mistake. But I watched my wife listen to the same two-second recording on loop over and over, trying to be certain of which sound she was hearing in the middle of the word. Double-checking the output of the model would (in most cases) only require listening to the audio once or twice, not half-a-dozen times like she typically did while researching her thesis. At the time, LLMs were not really a thing yet, but if she were doing her thesis today I bet a speech-to-IPA model would have saved her quite a lot of time — but only if it output every distinction, even the ones not meaningful in the target language. The "maximally faithful" representation, as you put it.
Through all this I kept wondering (and excuse the question if it is inappropriate): what’s the benefit of a transcription of the sounds since the ideal is a 1:1 IPA representation to audio recording and neither is itself a translation?
Isn’t the recording itself “more ideal” than any representation of it?
The main benefit that I see (not being a linguist myself and seeing it second-hand, as it were) is saving time; it's quite a lot of effort for humans to listen to an audio recording and write it down in IPA. I didn't realize just how much effort was involved until I watched my wife researching her thesis, listening to the same recording over and over and over.
Also, there are possibilities for automated translation that the IPA transcription opens up. Speech-to-text models need different training than text-to-text translation models. The other day one of the linguists I know sent me a message, saying "I have a lot of recordings in language X" (I forget which language, but it doesn't really matter which language it is) "and I want to transcribe them. Is there a way to use AI to do that?" I thought it through, and realized that recording-to-IPA followed by IPA-to-correct-alphabet would be a way of dealing with the combinatorial explosion (according to https://www.ethnologue.com/insights/how-many-languages/ there are close to 7,200 languages spoken in the world, though "spoken" may be a misnomer since that number includes sign languages). There's no way anyone can train a model to convert about 7,000 languages from spoken form to written form; that's just way too many possibilities, and I suspect that audio models are necessarily large because audio is more complex information than written text. (If I'm wrong on that, someone please inform me). But although the human mouth (and throat) can produce dozens and dozens of different sounds, that's a finite number. (I think it approaches a couple hundred, but that's still a lot less than 7,000). So the number of distinct sounds and their IPA equivalents that the model would have to distinguish is smallish. Then another model could be trained on converting IPA to the alphabet (and spelling) of the world's 7,000-ish languages — and that would be a lot simpler than sound-to-spelling.
You're right that the recording is "more ideal" than any representation, and linguists will always archive the recording (in a lossless format, whenever possible, though if the original recording was done by a non-linguist who recorded it in MP3 then there's not much point in storing a WAV) alongside their transcription. This allows anyone else who might be doubtful on a point to go listen to the original recording and say "Yeah, Smith got the transcription wrong on that word. That's not an alveolar click, it's a velar click." But when you're writing a paper, you don't stick audio recordings into your document, you write down transcriptions. An audio recording without a transcription is not nearly as useful to linguists as having both. (EDIT to add: And such transcriptions, when you're writing papers about the sounds of a language, are pretty much always in IPA as well as in the language's standard alphabet. IPA isn't just a means to an end, it's also an end in itself. So even if a speech-to-text model existed for the language my linguist friend wanted to transcribe, he would still also want an IPA transcription as well, 90% of the time.)
Congrats on shipping this. I love handy on my Mac, my phone for STT in situations where it’s not possible/poor performance of the native
Model for STT(e.g apple’s thing is not upto scruff, like mistranslating words corresponding to a domain).
Noob question: How do you think about funding from a foundation(i have no clue if you need it or not, I do hope you have a way to get paid one way or another because handy is amazing) for maintenance of this? if you did or were going to get paid by asking for maintaining such a project what might be the kind of organizations you would look for to get supported and how would you do it?
Thanks! What an excellent question, I’m not sure I have a good answer. I kind of became an open source maintainer by accident as Handy became popular
Certainly I am very lucky that quite a few people donate to Handy, and also some people and organizations who sponsor the work I do
To be honest I just love contributing to open source and wish to continue to do so. So anyone who supports this is good to me. Organizations which believe in OSS and push it forward are typically most aligned with me
Of course you can always email me (contact@handy.computer) and we can discuss in more detail
OS-native dictation on iOS requires uploading your address book to Apple on every request, even if you don’t use iCloud. I unfortunately have to leave it disabled for this reason.
I believe you're correct as of the last few iPhone generations. iOS 27 (with newer models of device required) have even better transcription coming as well, all on device.
For anyone looking to build on top of this. I have tried a few different STT systems, and they accurately capture what I am saying. Unfortunately, they don't support the reasonable workflow
I want to open an office document, for example, and start talking. And I want the software to continuously type what I am saying at the cursor with minimal latency. The continuous part is crucial. Many software will paste whatever I said after I have stopped recording, but that is not useful.
Totally understandable, but I’ve found that software that transcribes everything after I finish recording actually works better for me. I’ve tried both kinds, and systems that continuously type what I’m saying distract me from completing my thought. I end up reading what’s being typed and noticing transcription mistakes instead of focusing on what I’m trying to say.
I often prefer to dictate everything in my head about a particular thing for 5–10 minutes and then go through it afterward. I find that much more useful because it doesn’t break my thought process the way continuous transcription does.
I can understand both modes. I mostly use transcription as input for my AI assistant and there I find it very useful to be able to check my input and just repeat myself in case something wasn’t fully captured. When using Apple’s transcription feature built into iOS and macOS, I also really like being able to edit everything right while the dictation is still active.
Dream would be a combination of AI models that are smart like a human transcriber. One can just tell the model what mistakes it has made (e.g. "No, you wrote XYZ but I meant WXY"), and it is intelligent enough to realize when it is being instructed and when it needs to transcribe exactly what I say.
A while ago, I auditioned about 10 different STT apps on my Mac, with this realtime/streaming transcription as a goal. I failed to find that feature in an app I was happy with, but settled on Handy as the best option otherwise. So if Handy adds this, it will be perfect!
I’m on a train right now but off the top of my head the audio pipeline may have to be modified slightly to emit partial text segments as they come in from the transcription engine. And then calling the appropriate paste method the user has in their settings.
It may be easier than expected in some way since we already emit events for the live overlay, so it could be as small as a function call, but I don’t know the code path well enough from memory and what complexities it has. Probably with the Tauri context and a bit of other mess we have as this bit of code has gone through a lot of pain
It may be interesting to have it immediately insert the words, even if they are wrong, and when a sentence is finished, replace what has been written with the final corrected sentence.
Google released this awkwardly named app called edge eloquent recently that does exactly that.
In fact, it cleans up the entire paragraph that you just said, and even if you have meandering thoughts, it cleans those up too.
Actually, this above statement was fully dictated with iOS and it added all the punctuation automatically, so I think that iOS is also doing some of this natively. In fact, I’m on the iOS 27 beta and it seems to be doing an even better job of correcting itself and correcting earlier words and adding punctuation too.
I tried this on my Mac soon after launch and it was consuming a significant amount of processor cycles even just sitting idle in the menu bar. (From memory, ~20% of an M1 Max.)
It may have been an early issue but with no obvious way to interact and report the issue and, eh, Google’s general attitude around customer satisfaction, I just gave up and deleted it again.
In fact, a few apps I have tried do exactly this inside the app themselves. There is a live textual field that displays whatever the model thinks, and this display constantly goes back and fixes earlier words.
So I know it's possible. I just want to integrate this with the paste-at-cursor feature that these apps have. I imagine the app would have to create a virtual keyboard and use backspace or arrow keys to go back and change things.
But this is still possible to do if you track the whole run of text. You could replace all of it each time so it LOOKS like it’s streaming but earlier words also change. I’m hoping the streaming models do this eventually.
I believe the built-in iOS dictation already does this.
More accuracy. Like others have said, homonyms (their, they're, there) is easier to determine once you have more context. So then you may need to go back a couple words and update them.
Same with punctuation, you could determine that a comma belonged in a certain place once you have enough words.
In iOS this means you can edit the text as it’s being transcribed. For example, I want to dictate a todo list and after each item I can hit enter to go to the next line.
I suspect the hard bit is that it sometimes needs to back up and redo, and that's an interface they haven't got figured out. I'm fairly sure I remember Dragon Naturally Speaking doing it in Word years ago though, so the interfaces should be there.
Model should be able to understand where logical sentence ends, to stop buffering, and optionally rewrite some of the test that has already been output.
> The continuous part is crucial. Many software will paste whatever I said after I have stopped recording, but that is not useful.
It really depends on how one uses transcription.
For example, I really value being able to open different windows, and look at graphs, or scroll some data while I'm dictating, because it can help me with providing some support information for what I'm saying.
Some apps can even take into account things you copy or look at as part of the transcription's context to improve the results [0].
This is pretty cool. The dream would be that all editors (including brower tabs) have an api interface which allows arbitrary LLMs to modify the editor content. So you can indeed look at different windows as you talk, but the editor keeps getting updated live, so you can go back and see where you already at.
Apple Dictation does this, or something similar, in my experience. Some apps (e.g. terminals in my experience) buffer the entire transcript but in most apps it's identical to typing as you speak. Have you tried it?
Nice. Here's the Python one: https://github.com/handy-computer/transcribe.cpp/tree/main/b... - looks like it's not yet available as a binary wheel on PyPI with the dependency included (the library on PyPI right now uses ctypes to call a separately installed library) but that's planned for a future release.
The numerical validation and WER testing are what stand out to me here. A lot of local ASR projects claim broad model support, but it is often difficult to know whether the converted models still match their reference implementations. Having one embeddable engine across Vulkan, Metal and CUDA, along with maintained language bindings, addresses a real distribution problem.
How stable do you expect the C API and model format to be after v0.1? In particular, could an application eventually switch between different model families without needing model-specific preprocessing code?
What good timing to spot this. I've been reading more and more people talk about bringing TTS into their prompting toolkit and wanted to give that a try. The idea of rambling brain dump into a doc -> edit pass -> send to the robot loop sounds appealing.
This is an incredible contribution to the community and it's just... one guy? I kept reading expecting a Series A funding announcement at the bottom.
It's a nice reminder: You can use AI to slop cannon at maximum speed, or you can use it to scale your ambitions and build something more rigorous and lasting than ever before.
I'd build Transcribe.cpp into the apps I maintain, but I feel like this functionality should (generally) be integrated into the OS or "everywhere" via an app like Handy.
Hey, yep author and maintainer here! Certainly sponsors help and the wonderful community who donates to Handy as well! Mozilla AI was very helpful in getting this work off the ground. It was a pipe dream for me to build for Handy and they helped to sponsor me so I could make time to take this project seriously and get a v0.1.0 release out the door
I agree this should be everywhere and I hope to distribute libtranscribe some day properly so it is more a system library! It will take time to stabilize but I think we can get there
> I think as we look forward to the future, more inference will start happening locally for one reason or the other. This brings the distribution story front and center. In order to have more applications running inference locally, we need to make running inference easier.
This makes these projects so much more trustworthy and easier to approach:
> Were any of the words here written using AI? Nope. They came from my mouth or my fingers.
>This makes these projects so much more trustworthy and easier to approach:
>> Were any of the words here written using AI? Nope. They came from my mouth or my fingers.
I have to push back on this a bit, as I believe (quite strongly) that we're shaped by the tools we use; text-to-speech LLMs are still LLMs, and generally their mistakes are shaped by the expectations inherent in their training. This, in turn, shapes the words that appear on the screen. For those who regularly use them, you then learn which word sequences are likely to be accurately transcribed, and this definitively becomes part of your thinking process. Over time, the LLM becomes tangled into your thinking; the use of AI, even in this way, very much can and often does shape the resulting words.
Isn't this like saying "my words are not really my own when I speak to my family, because I know my father is a non-native English speaker and hard of hearing so I try to use words which are well enunciated and are few in syllable count"?
You can take it one step further! As Tyutchev wrote, "A thought once uttered is a lie." [1] Speech is a projection of a thought, and a lossy one. So no matter who is the listener, the speaking/writing does affect the thinking. Though comment on LLM transcribing is spot on.
Thank you! I found this to work much better then the old transcribe-rs lib. I updated my Offline Voice Input App to also use the new library and it's much faster now: https://github.com/notune/android_transcribe_app
Yep, but I am in the process of also porting NVIDIAs Sortformer for multi speaker diarization as well :)
I’m not sure how many specific models will be supported as the library is more focused on transcription specifically. But the models which support diarization natively must be supported I think. And parakeet multitalker was the primary driving force for this change
How close do you aim for when it comes to drop-in vs whisper.cpp? Are timestamps per word and character something aimed for? How about multi-lingual transcription or hallucination suppression?
The github page doesn't seem to go into depth on these orthogonal topics. May have missed it.
Eventually I would like to be more fully drop in compatible, right now some feature support is a bit sparse. And whisper has so much work done to it over the years so it’s hard to support every possible thing. Right now it’s a more bog standard implementation than anything special. Right now stabilizing the core header is probably among the primary goal, but if people want to contribute model specific things im happy to review test and pull in. Whisper is a good case for this as there is a header extension already so it’s easier
Oh, I like this! I’ve been looking into locally hosting a transcription API server and came away feeling pretty close to the problem statement. The things most frequently lacking were streaming support (which I’m so glad this has!) and the support for special words to boost during recognition (which I guess there’s some hope they might add???).
> I’ve been looking into locally hosting a transcription API server
I've been hosting my own since whisper.cpp appeared on the scene, thrown up on a server with a 3090ti. Even if there is better/faster stuff out today, it just keeps on working without any issues, the weights are tiny and it's faster than I could need. This is basically what you need to get this working today:
Very simple stuff, throw it on some local homelab server and now you have a local transcription API :) Might need to play around with some of the inference parameters, but once you've locked them in, seems to work really well.
word boosting will probably come on a much longer time horizon, but streaming is here!
I'm really hoping someone either contributes a good server example to the codebase (and is willing to help with issues) or use transcribe.cpp or the bindings to create a robust server in another language :) would be happy to link it from the main project directly as well
Amazing, i've been looking for something like this and ended up doing transcription + diarization on a local server for now. Are you looking for contributions? Have you tried this one for diarization - https://huggingface.co/pyannote/speaker-diarization-communit... - it performed much better than Sortformer for me.
Contributions are always welcome! There’s a WIP diarization PR rn, and after it’s merged would love to have support if it fits well into the interface. And if not would love to figure out a good interface for it
Yeah, diarization is the real feature these days. STT needs uniformization, but quality of diarization is what is setting personal solutions apart in this field.
The post makes it seem like ONNX is CPU only. I've used ONNX runtime to run models on Nvidia GPUs. The runtime can even dispatch to TensorRT. I'm not sure what the performance is on Apple hardware so maybe that was the motivation for moving away from ONNX.
TensorRT and CUDA is effectively the same speed as CPU for the speech to text models I was testing via ONNX at a huge binary bloat penalty. WGPU is hard to ship and also equivalent speed or slower. This may not be the case for LLM or other models but the runtimes did not seem well supported for what I needed to do. ONNX is incredibly well optimized for CPU, best in class even, but the other execution providers at least for STT seemed lacking.
I did this investigation before creating transcribe.cpp it would have been much more convenient and save me literal months of work. Happy to share the repo and binaries produced as well, but it was mostly throw away work to profile how to ship accelerated ONNX in Handy.
I'm using this in one of my side projects, Emyn ( https://github.com/terhechte/Emyn ) a macOS virtual camera app for composing camera video, app windows, backgrounds, effects, notes, and captions into a polished live presentation feed.
It works very well, the integration is much easier than before, users have model choice. So happy that this exists!
Wow, it's amazing to hear that even though I released this so recently people are already using it properly! Thanks! Please let me know any issues you run into
Nice. I did transcriptions on a casual project before that went through something like this. Transcribing videos or audio files with Whisper? Very common. But having to swap it out with Qwen3 or a different family of ASR models? Oops, not as straightforward. For Qwen for example you gotta deal with the forced aligner or it won't be good as subtitles, and then gotta deal with some requirements and considerations if you want to make use of MLX on a Mac or something.
Will definitely check this out since it sounds like it eases through the pain of dealing with these.
Anyone know a good Windows app that's just a window that transcribes - and translates - whatever goes through your output device, and not the microphone like most apps do?
Congrats! I just tried Handy again which now uses transcribe.cpp and it works brilliantly. Love the streaming output from Parakeet Unified EN 0.6B. I remember using Handy about a year ago and it's amazing to see the improvements!
Why not include transcribe-cli in the release archives to make it easier to use for people that can't compile it themselves? I downloaded the Cuda version but it's only the dll files, I don't really want to have to deal with Cuda SDK, I doubt most people want to.
Right now I intend to maintain this as a library. The examples are just that, examples for programmers/agents. If someone in the community wants to step up to maintaining release binaries I will gladly have that support, it's just impossible to do as a sole maintainer
Yeah I’m working on it, Linux is a big pain point especially Wayland
Once things are more or less ironed out on MacOS and Windows a lot of attention will be turned towards Linux
I know a lot of Linux PRs are open it just takes me so long to get around and test them. And often multiple different implementations trying to fix similar issues which is a lot of overhead sometimes
Is there any way people can help? From your last sentence, it sounds like another PR isn't it and the opposite might be needed. But would love to contribute with testing if helpful. I'm regularly jumping between XFCE, KDE, GNOME, Niri, etc..
Testers by far as the most needed thing, I do maintain a list of per platform people who help to test so if you drop a GitHub username (or email me) I will add you to the list and ping for help
Basically the biggest blocker is me being the sole maintainer and reviewer at the moment and it just ends up taking a lot of time for the scale of the project. Which is why it moves slow and features typically are much slower than someone can vibe code. I know each added feature inevitably has bugs so I try to be careful with them.
But also Linux has historically been a minefield, fixing something for someone breaks for someone else so yeah testers really needed. Or anyone with deeper Linux DE knowledge than I have. I’m much more accustomed to server based Linux distros
I have a personal fork of hyprvoice[0] which I use almost everywhere now (w/ the big cohere-transcribe running on a local vLLM instance). It does a similar thing, but that's not why I'm mentioning it; I think it's worth looking at because it's a clean reference for the few elegant ways you can implement text injection in modern Linux (wayland).
It supports ydotool[1], wtype[2] and "clipboard fallback with clipboard restore". The first two you can probably think of as AHK equivalents - they wire in at the input layer and inject keystrokes when injecting text. wtype is wayland-only and a bit less invasive, ydotool supports non-wayland also apparently, but I haven't tried it. Neither approach provides 'instant text' - you have to watch the text get typed out, and you don't touch your keyboard while it's happening; the clipboard implementation is fallback for a reason as it's the least reliable. The first two work 'well enough' though, and are fairly tunable.
The other thing hyprvoice does in probably the most linux-friendly and universal way is the 'hotkey handling'. The server creates a socket in /tmp that the cli can then ping when the user triggers the start/stop/cancel, and they do this by binding whatever their DE's keyboard shortcut mapping mechanism is to trigger `hyprvoice toggle` as a background shell command. This works extremely well and is much cheaper than you'd intuitively think coming from Windows. This way you don't have to interface with DE-specific global keyboard listeners etc, but leave that to the WM (that's not to say that your installer couldn't prompt the user to configure the keyboard shortcut for them with their detected WM, you just wouldn't do it in the software itself).
I haven't actually looked at your project in too much depth yet as I have a solution for this already, so apologies if none of the above is news to you. Hope it helps though - happy to poke around and contribute something if the gap's still there.
Really cool that every model is actually tested for accuracy instead of just claiming it works, I think alot of 'we support everything' tools skip that step. How are you checking accuracy for models that don't have an obvious "official" version to compare against?
Every model with open weights has some code which can be used to inference it. So we download the published weights and run against inference library they suggest, be it transformers, Nemo, etc
Is there something but for transcribing what you watch like videos and not your microphone? Samsung has this in my phone and it's useful for language learning. (Thought is not that accurate)
What's the best local TTS model right now? I'm running parakeet on a mac which transcribes all my uh's and aahs. I'm running whisper on linux/cuda and I by far prefer that one over parakeet.
I run the same, if you want try a simple filter post transcription to remove them, and while you're at it add some simple word replacements like 'cloud MD' to 'CLAUDE.MD'
One thing I find that's missing a lot or at least I haven't come across other than commercial offerings like AquaVoice is a decent injected technical vocabulary so that the initial transcript requires minimum cleanup afterwards. Because I mostly use these tools to essentially ramble at the command line with coding agents. So there's a lot of technical terms that don't translate well. Like OpenBao comes out as open bowel sometimes,lol. That necessitates significant cleanup prompt or background text available to the cleanup llm, usually in the form of screenshot or something that gets converted to text but that in turn requires good hw for speed to be almost imperceptible. For example m5 max turns cleanup into a noticeable delay while 5090 is decent.
Only way I have found that's relatively easy to inject technical vocab is to use whisper, but limited, I think to about 220 or so tokens. Whisper has sort of like a priming prompt where one can put in a bunch of technical words and it will try to recognize those. But again, that's limited to small number tokens. And that limits one use a relatively slow, by today's standards, whisper.cpp.
I benchmarked it across a bunch of different hardware that I have available, and Whisper gives decent performance as far as speed goes only on a pretty top-end GPU, such as a 5090 or 4070, like for example on Strix Halo, it's still relatively slow for longer transcriptions because I prefer just a stream of consciousness ramblings for minutes and then that being transcribed and cleaned up versus short sentences. So in that scenario something like 5090 really is good because the cleanup prompt runs fast using usually Qwen 3.6 MOE model. Whisper on 4070 itself is about 0.7 seconds for two or three minute transcription. So the total wait time for a three-minute transcription is roughly a second, or a little bit more than a second, so totally acceptable. But it does take decent hardware, and it grows to be double that on if running totally local. Well, in my case, it's all local, but it's my own hardware all over the place, but truly running on laptop, it's much faster using Parakeet, but then the cleanup is the bottleneck.
Anyway, it's just my experience messing around with this for the last year. I did start using AquaVoice, but their speed was exceptional, and tech vocab was exceptional, but they would have some annoying delays occasionally, and I didn't like paying the money and sending sensitive topics and screenshots into the cloud, and I had hardware, so my local solution is basically almost as good as commercial one. But I think they train their own model. So what I'm doing is I collect all the samples of my transcriptions, and I am slowly building my own data set that hopefully at some point when I get energy I will find some way to fine tune something.
Not in the library itself, it’s pure inference. Some models have this trained out of them anyhow. Otherwise this is a post processing task which is not really inference
Is transcription a form of _inference_ though? I mean I see the word being thrown around and I understand what it means (or at least I think I do) in context of LLMs doing the thing that they do -- intelligently predict the next token, but do speech-to-text models do that?
three separate people in this thread independently remembered Dragon NaturallySpeaking and I think that is the funniest possible review of the state of speech recognition in 2026
After seeing so many *subscription based* transcription apps all wrapping *open source models*, finding Handy was a real delight and I'm happy to see the author keep on building!
Has anybody experience with using this with strong dialects, like e.g. bavarian-family (German) based ones? Or other languages one too, as I'd figure basic behavior and approaches to improve detection of such is often similar in principle for dialect style variants of a language.
I mean, I naturally should try myself, and plan to do so, but slightly lower on my free time priority list and I figured someone else might have explored this already.
Nice - I'm definitely going to take a look at this. I've built my own cross-platform (Mac/Win/Linux) live captioning app on top of Nemotron, and it works well but dealing with ONNX is kind of annoying. With this having Rust support (I built it on Rust/Tauri) it should be a pretty solid candidate; I'll have to see if I can find a Silero VAD implementation that doesn't depend on ONNX, or maybe I'll see if the clankers can migrate it for me.
The first run experience isn't great, you'll need to download all the files from the model, start the app, and then go to settings and configure the model directory. It runs well on Mac and Windows; I haven't tested it on Linux in a couple of months since my Linux install is out of commission currently.
Congrats on delivering good value to the people. I have used transcribe.cpp a few weeks ago to do near realtime offline stt on a 10 year old phone, writing simple adhoc app for my use case, it's crazy what is happening right now.
Handy is an amazing cross-platform app for dictation from the author. There are other awesome open-source dictation tools as well like native macOS ones. You do not need SaaS subscription in this day and age for transcription.
I maintain this list of all the best open-source ones in this awesome-style GitHub repo. People looking for open-source dictation tools, hope you find something that works for you here:
If you're talking about translated text, then that should be super easy. Most of these dictation tool support post-processing with LLM to remove filler words, fix punctuation, etc. I'd imagine you can change the system prompt for the post-processing step to do the translation instead, and you'd get translated text.
Yea I’m looking local hosted transcription and translation with diarization of 2 (or more ) speakers. This is to speed up collaborative technical work between two teams who speak different languages where want all local processing (assume no cloud access).
Looks very cool. One thing I have been looking for, which this doesn't seem to cover (at least I didn't see any mention of IPA in the model documentation), is a way to transcribe unknown languages phonetically, using the International Phonetic Alphabet to spell them (sound-based spelling rather than meaning-based spelling). I know several linguists doing research on minority languages (fewer than 10,000 speakers in some cases), which are small enough that they will never have enough effort made towards training language-specific models in that language.
Are there models I'm not aware of that are trained for this task? Taking audio in an unknown language, and rather than identifying the language, just transcribing the sounds to IPA? That would not be useful to most people, but it would be a Godsend to many, many linguists working with minority languages around the world.
This field got reactivated recently, some new models were released (in the order of release, but the last one seems the best at the moment):
1. ZIPA https://github.com/lingjzhu/zipa
2. POWSM https://huggingface.co/espnet/powsm
3. PhoneticXEUS https://github.com/changelinglab/PhoneticXeus
I would be curious to know how to help people to use these models, or what kind of tasks they could be applied to.
We take a lot of shortcuts when speaking, it's actually much harder to transcribe phonemes than to transcribe words, even when aware of the language being spoken. Some models have been trained for the task (e.g. look at https://huggingface.co/spaces/KoelLabs/IPA-Transcription-EN ), but the error rate is really high.
There are, broadly, two kinds of audio recordings that linguists want to transcribe. One is native speakers telling traditional stories, where they're speaking naturally and taking the natural shortcuts (such as "wanna" and "gonna" in English). The other is native speakers reading words (or short example sentences) very carefully and distinctly, so that the linguist can listen to the recording over and over to learn how to pronounce the word right. In those recording, they'll say "want to" and "going to" rather than "wanna" and "gonna".
Thanks for the pointer; I'll check out that model and see if it handles the "slowly and carefully" type of recording better than the "natural speaking" type. (And depending on what kinds of errors the model makes, even the recordings where it makes errors can prove useful: for example, a linguist studying regional variations in speech would want the model to produce the IPA for "gonna" rather than "going to").
Dialects degenerate phonemes that would otherwise occupy identity relations between different utterances of the same "word" (word/concept mutable hyperobject as is the standard in any socially-relevant spoken language) which would be a bit of irony in this thought experiment since common knowledge dictates that more data samples must be present in the dataset (not less, as in rarely-spoken languages) to associate separate pronunciations of utterances representing the same underlying concept. However very-rarely-spoken languages probably don't have distinct dialects since so much focus is put on mutual intelligibility with the few members of the group that remain fluent in that language. It's not outside the realm of possibility that small speaking communities nonetheless fractionate into dialectical specialities but that seems increasingly unlikely as the fervor for preserving/recognizing dying languages increases, and global instant communication continues to become more commonplace.
Example: Schwabisch is wild and would be phonetically transcribed very differently from Hochdeutsch which is its ostensible language progenitor (technically more a cousin than an ancestor in the lineage of language evolution), but if the goal is merely to focus the model purely on phonetic transcription then you can add additional post-processing layers which map sounds to core concepts shared across dialects for actual translation. But I like your idea of interacting with the intermediate elements to familiarize yourself at least with the phonetic patterns, we humans are still thinkers enough to infer patterns of grammar and semantics from these building blocks just as we have done for the entire history of the species/lineage before written representations of language came along (relatively late -- evidence of script cropped up only once civilization had centralized to a sufficient degree to make economics non-local and non-trivial).
tl;dr the big words: it's not til you collect enough spoken samples of the dead(ish/dying) language being spoken that the local idiosyncracies are discovered, luckily linguists are smart enough to probably anticipate and certainly post-process language snippets to grasp the common structures for this or that given language.
> ... very-rarely-spoken languages probably don't have distinct dialects ...
That's true if you mean "very rarely spoken" literally, as in even the native speakers don't get to use it very often. But many languages aren't widely spoken (such as only in a certain geographical area, which sometimes is only a single village, or other times a small number of villages). But inside that area, they are frequently spoken. And you might be surprised how many of those small-geographic-area languages still have distinct dialects.
For example: my wife (a linguist) did her master's thesis on the pronunciation of a language with about 7,000 speakers, and identified how many distinct dialects there were. (Which is why I know a little bit about this). She recorded native speakers from all 13 (I think it was 13, but it might have been 14) villages where the language was spoken, and found five different dialects, which she grouped into two "main" dialects. (Think American vs British in the English language, with subdivisions into Midwest, New York, and New England accents and so on, and you'll have the right general idea — though these dialects were closer to each other in sound than Midwest vs New York). I'd have to go reread her thesis to give you any more details. But this was a language that was only spoken in a small geographic area, but it was frequently spoken, because that was the main language of those villages. (The country's official national language is what the kids learned in school, but some of the people, mostly those 60 years old or older, hadn't gone to school, because the first government school in their area was only built 60 years ago -- so they only spoke their minority language, and not the country's language, and their kids had to translate for them if they had to leave their village and go shopping in a major town).
I would love such a model. My wife's family is Iu Mien which is a sub group of the Dao/Yao Chinese ethnic minority. Mien is its own language but most speakers are essentially illiterate. I'm good with language but there simply isn't a course or any books for learning the language. Not much in writing to begin with given the high illiteracy rate. I would love to build a translation system - project Hail Mary style :)
FWIW someone wrote their PhD thesis on the Iu Mien language: https://opal.latrobe.edu.au/articles/thesis/An_Iu_Mien_gramm... It's not a textbook, but that doesn't mean you can't try to use it as a textbook. For example, there are some thoroughly-analyzed example texts. Also, the acknowledgments section mentions the Iu Mien Literacy Project, which has published a short course on the very basics, as it turns out: https://iumienliteracyprojects.com/resources/ I suspect the 925-page PDF contains some more hints to additional resources like that. :)
Unfortunately there are two sub groups of Iu Mien with somewhat different vocabulary as well - and my wife is from the other group. I had found this pdf document previously - thanks for the pointer! I'll see what I can do with it.
Largely this is out of scope for the library, mainly because I’m not aware of many models supporting this. but if there are models which support this would be happy to support
Automatic Phoneme Recognition (APR). There are some models that do this, but they're only so-so.
It sounds like the only way this would make sense is if such model knew the range of sounds it expects to "hear". There's a lot of possible sounds that IPA knows about, but world languages only use a fraction of them at once. Think English dark and light "l" (ball/light) or aspirated "p" (pin/spin) - some languages contrast them, while in english the difference is not meaningful.
Or maybe linguists are actually interested in having maximally faithful IPA representation and manually normalizing it? You are clearly way more knowledgeable about that topic than I, so I'm curious what you think.
The linguists I know are not necessarily a representative sample... but they're mostly interested in just that: maximally faithful IPA representation. They want to know if the speaker switches back and forth between aspirated p and unaspirated p on the same word, because that tells them something about the language — that aspirated consonants are not meaningful.
Linguists studying the sounds of a language, its phonology, often want to find "minimal pairs", words that differ by only a single sound. For example, din and tin in English. You record a native speaker saying both words, and telling you their meaning, and then you play back either recording A or recording B to other native speakers and ask them which word it is. If they can identify the word every time, then you've found two sounds that are meaningfully distinct in this language. (Some languages don't distinguish the d and t sounds, but English does). But if the native speakers go 50/50 on which word it is, or ask to hear it in a sentence for clarification because it could be two or three different words, then you've found a pair of sounds that this language does not distinguish. (Note that you're playing the words in isolation, because sentence context might make it obvious which one it is, e.g. you can't tell if an English speaker is saying their or there until you hear more words of the sentence).
So yes, the linguists that I know (who, again, are not necessarily a representative sample) are interested in as faithful an IPA representation as they can get, because that inconsistent transcription will give them many clues about the language. It still all has to be checked, because that switching back and forth between aspirated and unaspirated p (for example) could have been an artifact of a poor-quality microphone not picking up the aspiration, or a windy day causing aspiration sounds that the speaker never said, or the speech-to-text model making a mistake. But I watched my wife listen to the same two-second recording on loop over and over, trying to be certain of which sound she was hearing in the middle of the word. Double-checking the output of the model would (in most cases) only require listening to the audio once or twice, not half-a-dozen times like she typically did while researching her thesis. At the time, LLMs were not really a thing yet, but if she were doing her thesis today I bet a speech-to-IPA model would have saved her quite a lot of time — but only if it output every distinction, even the ones not meaningful in the target language. The "maximally faithful" representation, as you put it.
Through all this I kept wondering (and excuse the question if it is inappropriate): what’s the benefit of a transcription of the sounds since the ideal is a 1:1 IPA representation to audio recording and neither is itself a translation?
Isn’t the recording itself “more ideal” than any representation of it?
I don't mind at all.
The main benefit that I see (not being a linguist myself and seeing it second-hand, as it were) is saving time; it's quite a lot of effort for humans to listen to an audio recording and write it down in IPA. I didn't realize just how much effort was involved until I watched my wife researching her thesis, listening to the same recording over and over and over.
Also, there are possibilities for automated translation that the IPA transcription opens up. Speech-to-text models need different training than text-to-text translation models. The other day one of the linguists I know sent me a message, saying "I have a lot of recordings in language X" (I forget which language, but it doesn't really matter which language it is) "and I want to transcribe them. Is there a way to use AI to do that?" I thought it through, and realized that recording-to-IPA followed by IPA-to-correct-alphabet would be a way of dealing with the combinatorial explosion (according to https://www.ethnologue.com/insights/how-many-languages/ there are close to 7,200 languages spoken in the world, though "spoken" may be a misnomer since that number includes sign languages). There's no way anyone can train a model to convert about 7,000 languages from spoken form to written form; that's just way too many possibilities, and I suspect that audio models are necessarily large because audio is more complex information than written text. (If I'm wrong on that, someone please inform me). But although the human mouth (and throat) can produce dozens and dozens of different sounds, that's a finite number. (I think it approaches a couple hundred, but that's still a lot less than 7,000). So the number of distinct sounds and their IPA equivalents that the model would have to distinguish is smallish. Then another model could be trained on converting IPA to the alphabet (and spelling) of the world's 7,000-ish languages — and that would be a lot simpler than sound-to-spelling.
You're right that the recording is "more ideal" than any representation, and linguists will always archive the recording (in a lossless format, whenever possible, though if the original recording was done by a non-linguist who recorded it in MP3 then there's not much point in storing a WAV) alongside their transcription. This allows anyone else who might be doubtful on a point to go listen to the original recording and say "Yeah, Smith got the transcription wrong on that word. That's not an alveolar click, it's a velar click." But when you're writing a paper, you don't stick audio recordings into your document, you write down transcriptions. An audio recording without a transcription is not nearly as useful to linguists as having both. (EDIT to add: And such transcriptions, when you're writing papers about the sounds of a language, are pretty much always in IPA as well as in the language's standard alphabet. IPA isn't just a means to an end, it's also an end in itself. So even if a speech-to-text model existed for the language my linguist friend wanted to transcribe, he would still also want an IPA transcription as well, 90% of the time.)
I learned IPA for Thai, and as part of that, I also read that a lot of professional linguists still find IPA too limited.
IPA seems very comprehensive from my amateur perspective, but apparently a lot of modern linguists still extend it or roll their own.
Congrats on shipping this. I love handy on my Mac, my phone for STT in situations where it’s not possible/poor performance of the native Model for STT(e.g apple’s thing is not upto scruff, like mistranslating words corresponding to a domain).
Noob question: How do you think about funding from a foundation(i have no clue if you need it or not, I do hope you have a way to get paid one way or another because handy is amazing) for maintenance of this? if you did or were going to get paid by asking for maintaining such a project what might be the kind of organizations you would look for to get supported and how would you do it?
Thanks! What an excellent question, I’m not sure I have a good answer. I kind of became an open source maintainer by accident as Handy became popular
Certainly I am very lucky that quite a few people donate to Handy, and also some people and organizations who sponsor the work I do
To be honest I just love contributing to open source and wish to continue to do so. So anyone who supports this is good to me. Organizations which believe in OSS and push it forward are typically most aligned with me
Of course you can always email me (contact@handy.computer) and we can discuss in more detail
OS-native dictation on iOS requires uploading your address book to Apple on every request, even if you don’t use iCloud. I unfortunately have to leave it disabled for this reason.
Are you sure? Just tested it and it works locally and offline
I believe you're correct as of the last few iPhone generations. iOS 27 (with newer models of device required) have even better transcription coming as well, all on device.
It says right on it when you enable it:
> Dictation sends information like your voice input, contacts, and location to Apple when necessary for processing your requests.
Oh my, this is the first time I read about it ever. Thanks for sharing it! I'll stop using the built-in dictation now.
For anyone looking to build on top of this. I have tried a few different STT systems, and they accurately capture what I am saying. Unfortunately, they don't support the reasonable workflow
I want to open an office document, for example, and start talking. And I want the software to continuously type what I am saying at the cursor with minimal latency. The continuous part is crucial. Many software will paste whatever I said after I have stopped recording, but that is not useful.
Totally understandable, but I’ve found that software that transcribes everything after I finish recording actually works better for me. I’ve tried both kinds, and systems that continuously type what I’m saying distract me from completing my thought. I end up reading what’s being typed and noticing transcription mistakes instead of focusing on what I’m trying to say.
I often prefer to dictate everything in my head about a particular thing for 5–10 minutes and then go through it afterward. I find that much more useful because it doesn’t break my thought process the way continuous transcription does.
I can understand both modes. I mostly use transcription as input for my AI assistant and there I find it very useful to be able to check my input and just repeat myself in case something wasn’t fully captured. When using Apple’s transcription feature built into iOS and macOS, I also really like being able to edit everything right while the dictation is still active.
Dream would be a combination of AI models that are smart like a human transcriber. One can just tell the model what mistakes it has made (e.g. "No, you wrote XYZ but I meant WXY"), and it is intelligent enough to realize when it is being instructed and when it needs to transcribe exactly what I say.
You can fairly easily modify [Handy](https://handy.computer) to do this if you want
I’m planning on having it as a first class feature of the app too just too many other issues to work on first
I’m really glad to hear this!
A while ago, I auditioned about 10 different STT apps on my Mac, with this realtime/streaming transcription as a goal. I failed to find that feature in an app I was happy with, but settled on Handy as the best option otherwise. So if Handy adds this, it will be perfect!
Can you give some pointers around this? I'd gladly help with a PR for this, but if you have anything docs/ideas around this it would be helpful.
I’m on a train right now but off the top of my head the audio pipeline may have to be modified slightly to emit partial text segments as they come in from the transcription engine. And then calling the appropriate paste method the user has in their settings.
It may be easier than expected in some way since we already emit events for the live overlay, so it could be as small as a function call, but I don’t know the code path well enough from memory and what complexities it has. Probably with the Tauri context and a bit of other mess we have as this bit of code has gone through a lot of pain
You know English doesn't work like that. The word you're saying only becomes clear with the surrounding context. Eg, 'there' vs 'their'.
It may be interesting to have it immediately insert the words, even if they are wrong, and when a sentence is finished, replace what has been written with the final corrected sentence.
Google released this awkwardly named app called edge eloquent recently that does exactly that.
In fact, it cleans up the entire paragraph that you just said, and even if you have meandering thoughts, it cleans those up too.
Actually, this above statement was fully dictated with iOS and it added all the punctuation automatically, so I think that iOS is also doing some of this natively. In fact, I’m on the iOS 27 beta and it seems to be doing an even better job of correcting itself and correcting earlier words and adding punctuation too.
This sounds fantastic, but I'm utterly surprised that Google, of all companies, only releases this for macOS and iOS, but not Android.
It’s an awkward app and the whole interaction just feels weird and kind of slapdash. I think it is meant to be a prototype.
But in this day and age it’s easy enough to at least write the iOS and Android versions. But maybe not dealing with the play store.
I tried this on my Mac soon after launch and it was consuming a significant amount of processor cycles even just sitting idle in the menu bar. (From memory, ~20% of an M1 Max.)
It may have been an early issue but with no obvious way to interact and report the issue and, eh, Google’s general attitude around customer satisfaction, I just gave up and deleted it again.
In fact, a few apps I have tried do exactly this inside the app themselves. There is a live textual field that displays whatever the model thinks, and this display constantly goes back and fixes earlier words.
So I know it's possible. I just want to integrate this with the paste-at-cursor feature that these apps have. I imagine the app would have to create a virtual keyboard and use backspace or arrow keys to go back and change things.
But this is still possible to do if you track the whole run of text. You could replace all of it each time so it LOOKS like it’s streaming but earlier words also change. I’m hoping the streaming models do this eventually.
I believe the built-in iOS dictation already does this.
What would be the benefit of this, besides from looking cool?
More accuracy. Like others have said, homonyms (their, they're, there) is easier to determine once you have more context. So then you may need to go back a couple words and update them.
Same with punctuation, you could determine that a comma belonged in a certain place once you have enough words.
Oh certainly, I was asking what the benefit would be to the opposite!
In iOS this means you can edit the text as it’s being transcribed. For example, I want to dictate a todo list and after each item I can hit enter to go to the next line.
Do the parts before you hit enter still get updated if later context indicates you said something else?
Handy already supports streaming transcription models, and you can see the words in the small Handy pop-up while you are talking.
So in general this definitely works. Handy is just missing the feature to insert these streamed words into the app where the cursor is.
I suspect the hard bit is that it sometimes needs to back up and redo, and that's an interface they haven't got figured out. I'm fairly sure I remember Dragon Naturally Speaking doing it in Word years ago though, so the interfaces should be there.
Model should be able to understand where logical sentence ends, to stop buffering, and optionally rewrite some of the test that has already been output.
IIRC that is exactly how Dragon Naturally speaking did it decades ago.
> The continuous part is crucial. Many software will paste whatever I said after I have stopped recording, but that is not useful.
It really depends on how one uses transcription.
For example, I really value being able to open different windows, and look at graphs, or scroll some data while I'm dictating, because it can help me with providing some support information for what I'm saying.
Some apps can even take into account things you copy or look at as part of the transcription's context to improve the results [0].
[0]: https://superwhisper.com/docs/common-issues/context#types-of...
This is pretty cool. The dream would be that all editors (including brower tabs) have an api interface which allows arbitrary LLMs to modify the editor content. So you can indeed look at different windows as you talk, but the editor keeps getting updated live, so you can go back and see where you already at.
This is what I attempted with https://github.com/electronstudio/low_latency_dictation
However the accuracy of the real time models is poor, so I did a second pass with a higher accuracy model before committing the text.
Agreed. It's something I've found annoying about a few systems.
It looks like the rust bindings have streaming examples so hopefully there is a nice solution here.
You used to be able to do this with dragon naturally speaking (don’t remember if that was it’s exact name) 10 ish years ago
whisper.cpp has realtime capability. Been using it for 2 years at this point
Apple Dictation does this, or something similar, in my experience. Some apps (e.g. terminals in my experience) buffer the entire transcript but in most apps it's identical to typing as you speak. Have you tried it?
> Maintainer supported bindings in 4 Languages
Nice. Here's the Python one: https://github.com/handy-computer/transcribe.cpp/tree/main/b... - looks like it's not yet available as a binary wheel on PyPI with the dependency included (the library on PyPI right now uses ctypes to call a separately installed library) but that's planned for a future release.
Yes, I’ve put a PR up on pypi for extra storage for CUDA but it has not been accepted yet afaik
If there’s any issues or improvements on the bindings I would love help to make the DX the best it can be
The numerical validation and WER testing are what stand out to me here. A lot of local ASR projects claim broad model support, but it is often difficult to know whether the converted models still match their reference implementations. Having one embeddable engine across Vulkan, Metal and CUDA, along with maintained language bindings, addresses a real distribution problem. How stable do you expect the C API and model format to be after v0.1? In particular, could an application eventually switch between different model families without needing model-specific preprocessing code?
What good timing to spot this. I've been reading more and more people talk about bringing TTS into their prompting toolkit and wanted to give that a try. The idea of rambling brain dump into a doc -> edit pass -> send to the robot loop sounds appealing.
This is an incredible contribution to the community and it's just... one guy? I kept reading expecting a Series A funding announcement at the bottom.
It's a nice reminder: You can use AI to slop cannon at maximum speed, or you can use it to scale your ambitions and build something more rigorous and lasting than ever before.
I'd build Transcribe.cpp into the apps I maintain, but I feel like this functionality should (generally) be integrated into the OS or "everywhere" via an app like Handy.
Hey, yep author and maintainer here! Certainly sponsors help and the wonderful community who donates to Handy as well! Mozilla AI was very helpful in getting this work off the ground. It was a pipe dream for me to build for Handy and they helped to sponsor me so I could make time to take this project seriously and get a v0.1.0 release out the door
I agree this should be everywhere and I hope to distribute libtranscribe some day properly so it is more a system library! It will take time to stabilize but I think we can get there
Spot on:
> I think as we look forward to the future, more inference will start happening locally for one reason or the other. This brings the distribution story front and center. In order to have more applications running inference locally, we need to make running inference easier.
This makes these projects so much more trustworthy and easier to approach:
> Were any of the words here written using AI? Nope. They came from my mouth or my fingers.
>This makes these projects so much more trustworthy and easier to approach:
>> Were any of the words here written using AI? Nope. They came from my mouth or my fingers.
I have to push back on this a bit, as I believe (quite strongly) that we're shaped by the tools we use; text-to-speech LLMs are still LLMs, and generally their mistakes are shaped by the expectations inherent in their training. This, in turn, shapes the words that appear on the screen. For those who regularly use them, you then learn which word sequences are likely to be accurately transcribed, and this definitively becomes part of your thinking process. Over time, the LLM becomes tangled into your thinking; the use of AI, even in this way, very much can and often does shape the resulting words.
Isn't this like saying "my words are not really my own when I speak to my family, because I know my father is a non-native English speaker and hard of hearing so I try to use words which are well enunciated and are few in syllable count"?
You can take it one step further! As Tyutchev wrote, "A thought once uttered is a lie." [1] Speech is a projection of a thought, and a lossy one. So no matter who is the listener, the speaking/writing does affect the thinking. Though comment on LLM transcribing is spot on.
1. https://www.poetryloverspage.com/poets/tyutchev/silentium/li...
Parakeet, probably the most popular model for handy-style transcription, doesn't include a "text-to-speech LLMs" or any other form of LLM
Thank you! I found this to work much better then the old transcribe-rs lib. I updated my Offline Voice Input App to also use the new library and it's much faster now: https://github.com/notune/android_transcribe_app
What's the easiest way to add speaker separation to this?
Hey! It’s actually in progress right now, probably will come this week :)
Awesome! I found the in-progress diarization PR here: https://github.com/handy-computer/transcribe.cpp/pull/85
Looks like it's using IBM's Granite-Speech-4.1-2B-Plus https://huggingface.co/ibm-granite/granite-speech-4.1-2b-plu... and/or MOSS-Transcribe-Diarize https://huggingface.co/OpenMOSS-Team/MOSS-Transcribe-Diarize
Yep, but I am in the process of also porting NVIDIAs Sortformer for multi speaker diarization as well :)
I’m not sure how many specific models will be supported as the library is more focused on transcription specifically. But the models which support diarization natively must be supported I think. And parakeet multitalker was the primary driving force for this change
How close do you aim for when it comes to drop-in vs whisper.cpp? Are timestamps per word and character something aimed for? How about multi-lingual transcription or hallucination suppression?
The github page doesn't seem to go into depth on these orthogonal topics. May have missed it.
Eventually I would like to be more fully drop in compatible, right now some feature support is a bit sparse. And whisper has so much work done to it over the years so it’s hard to support every possible thing. Right now it’s a more bog standard implementation than anything special. Right now stabilizing the core header is probably among the primary goal, but if people want to contribute model specific things im happy to review test and pull in. Whisper is a good case for this as there is a header extension already so it’s easier
Any chance you’ll be adding diarization of known speakers?
For example: from audio samples tagged with names
Oh, I like this! I’ve been looking into locally hosting a transcription API server and came away feeling pretty close to the problem statement. The things most frequently lacking were streaming support (which I’m so glad this has!) and the support for special words to boost during recognition (which I guess there’s some hope they might add???).
> I’ve been looking into locally hosting a transcription API server
I've been hosting my own since whisper.cpp appeared on the scene, thrown up on a server with a 3090ti. Even if there is better/faster stuff out today, it just keeps on working without any issues, the weights are tiny and it's faster than I could need. This is basically what you need to get this working today:
Very simple stuff, throw it on some local homelab server and now you have a local transcription API :) Might need to play around with some of the inference parameters, but once you've locked them in, seems to work really well.Does it support streaming? I find that this is the #1 thing missing from almost all implementations.
word boosting will probably come on a much longer time horizon, but streaming is here!
I'm really hoping someone either contributes a good server example to the codebase (and is willing to help with issues) or use transcribe.cpp or the bindings to create a robust server in another language :) would be happy to link it from the main project directly as well
Amazing, i've been looking for something like this and ended up doing transcription + diarization on a local server for now. Are you looking for contributions? Have you tried this one for diarization - https://huggingface.co/pyannote/speaker-diarization-communit... - it performed much better than Sortformer for me.
Contributions are always welcome! There’s a WIP diarization PR rn, and after it’s merged would love to have support if it fits well into the interface. And if not would love to figure out a good interface for it
Yeah, diarization is the real feature these days. STT needs uniformization, but quality of diarization is what is setting personal solutions apart in this field.
For sure, it was not initially a target because I didn’t need it for Handy but I do understand the importance in the broader context
The post makes it seem like ONNX is CPU only. I've used ONNX runtime to run models on Nvidia GPUs. The runtime can even dispatch to TensorRT. I'm not sure what the performance is on Apple hardware so maybe that was the motivation for moving away from ONNX.
TensorRT and CUDA is effectively the same speed as CPU for the speech to text models I was testing via ONNX at a huge binary bloat penalty. WGPU is hard to ship and also equivalent speed or slower. This may not be the case for LLM or other models but the runtimes did not seem well supported for what I needed to do. ONNX is incredibly well optimized for CPU, best in class even, but the other execution providers at least for STT seemed lacking.
I did this investigation before creating transcribe.cpp it would have been much more convenient and save me literal months of work. Happy to share the repo and binaries produced as well, but it was mostly throw away work to profile how to ship accelerated ONNX in Handy.
Just wanted to say I started using Handy last week and I love it. It might single handedly cure my RSI. Well, hopefully double handedly.
I'm using this in one of my side projects, Emyn ( https://github.com/terhechte/Emyn ) a macOS virtual camera app for composing camera video, app windows, backgrounds, effects, notes, and captions into a polished live presentation feed.
It works very well, the integration is much easier than before, users have model choice. So happy that this exists!
Wow, it's amazing to hear that even though I released this so recently people are already using it properly! Thanks! Please let me know any issues you run into
Nice. I did transcriptions on a casual project before that went through something like this. Transcribing videos or audio files with Whisper? Very common. But having to swap it out with Qwen3 or a different family of ASR models? Oops, not as straightforward. For Qwen for example you gotta deal with the forced aligner or it won't be good as subtitles, and then gotta deal with some requirements and considerations if you want to make use of MLX on a Mac or something.
Will definitely check this out since it sounds like it eases through the pain of dealing with these.
Well this almost seems to be to good to be true. :)
I assume this is going to make maintaining SubtitleEdit a lot easier from now on, too: https://github.com/SubtitleEdit/subtitleedit/.
Anyone know a good Windows app that's just a window that transcribes - and translates - whatever goes through your output device, and not the microphone like most apps do?
Any plans of including the VAD step into this? When whisper.cpp added Silero it really smoothed out the UX.
Congrats! I just tried Handy again which now uses transcribe.cpp and it works brilliantly. Love the streaming output from Parakeet Unified EN 0.6B. I remember using Handy about a year ago and it's amazing to see the improvements!
Why not include transcribe-cli in the release archives to make it easier to use for people that can't compile it themselves? I downloaded the Cuda version but it's only the dll files, I don't really want to have to deal with Cuda SDK, I doubt most people want to.
Right now I intend to maintain this as a library. The examples are just that, examples for programmers/agents. If someone in the community wants to step up to maintaining release binaries I will gladly have that support, it's just impossible to do as a sole maintainer
I saw that metal is almost x10 faster than vulkan? Why so much gap?
It very much depends on the hardware! An M4 max is being compared against a Ryzen 4750U with an integrated GPU!
The M4 max has probably 10x the compute and memory bandwidth hahaha
I'm using Handy on macOS and love it. Unfortunately, hotkeys still doesn't seem to work on Wayland, which make it unusable.
Yeah I’m working on it, Linux is a big pain point especially Wayland
Once things are more or less ironed out on MacOS and Windows a lot of attention will be turned towards Linux
I know a lot of Linux PRs are open it just takes me so long to get around and test them. And often multiple different implementations trying to fix similar issues which is a lot of overhead sometimes
Really appreciate your work.
Is there any way people can help? From your last sentence, it sounds like another PR isn't it and the opposite might be needed. But would love to contribute with testing if helpful. I'm regularly jumping between XFCE, KDE, GNOME, Niri, etc..
Testers by far as the most needed thing, I do maintain a list of per platform people who help to test so if you drop a GitHub username (or email me) I will add you to the list and ping for help
Basically the biggest blocker is me being the sole maintainer and reviewer at the moment and it just ends up taking a lot of time for the scale of the project. Which is why it moves slow and features typically are much slower than someone can vibe code. I know each added feature inevitably has bugs so I try to be careful with them.
But also Linux has historically been a minefield, fixing something for someone breaks for someone else so yeah testers really needed. Or anyone with deeper Linux DE knowledge than I have. I’m much more accustomed to server based Linux distros
I have a personal fork of hyprvoice[0] which I use almost everywhere now (w/ the big cohere-transcribe running on a local vLLM instance). It does a similar thing, but that's not why I'm mentioning it; I think it's worth looking at because it's a clean reference for the few elegant ways you can implement text injection in modern Linux (wayland).
It supports ydotool[1], wtype[2] and "clipboard fallback with clipboard restore". The first two you can probably think of as AHK equivalents - they wire in at the input layer and inject keystrokes when injecting text. wtype is wayland-only and a bit less invasive, ydotool supports non-wayland also apparently, but I haven't tried it. Neither approach provides 'instant text' - you have to watch the text get typed out, and you don't touch your keyboard while it's happening; the clipboard implementation is fallback for a reason as it's the least reliable. The first two work 'well enough' though, and are fairly tunable.
The other thing hyprvoice does in probably the most linux-friendly and universal way is the 'hotkey handling'. The server creates a socket in /tmp that the cli can then ping when the user triggers the start/stop/cancel, and they do this by binding whatever their DE's keyboard shortcut mapping mechanism is to trigger `hyprvoice toggle` as a background shell command. This works extremely well and is much cheaper than you'd intuitively think coming from Windows. This way you don't have to interface with DE-specific global keyboard listeners etc, but leave that to the WM (that's not to say that your installer couldn't prompt the user to configure the keyboard shortcut for them with their detected WM, you just wouldn't do it in the software itself).
I haven't actually looked at your project in too much depth yet as I have a solution for this already, so apologies if none of the above is news to you. Hope it helps though - happy to poke around and contribute something if the gap's still there.
[0]: https://github.com/leonardotrapani/hyprvoice [1]: https://github.com/ReimuNotMoe/ydotool [2]: https://github.com/atx/wtype
toggle is possible via Handy cli but not push-to-talk.
Does the whisper model allow for entering context(which improves the accuracy greatly) as it does on Whisper.cpp?
yes
Really cool that every model is actually tested for accuracy instead of just claiming it works, I think alot of 'we support everything' tools skip that step. How are you checking accuracy for models that don't have an obvious "official" version to compare against?
Every model with open weights has some code which can be used to inference it. So we download the published weights and run against inference library they suggest, be it transformers, Nemo, etc
So it's mostly intended to be a better replacement for whisper? Mostly? With better support for more models and maybe acceleration backends?
More or less yes, for whisper.cpp, just trying to make local transcription more accessible to anyone building an app, etc
Is there something but for transcribing what you watch like videos and not your microphone? Samsung has this in my phone and it's useful for language learning. (Thought is not that accurate)
Excellent work, paired with the 500kb TTS model headlining today I can see the full stack coming together.
saw the demo its impressive but the audio was robotic
What's the best local TTS model right now? I'm running parakeet on a mac which transcribes all my uh's and aahs. I'm running whisper on linux/cuda and I by far prefer that one over parakeet.
Parakeet unified for me no longer does this and it’s also a streaming transcription model!
But the answer largely depends on you, the languages you speak, and personal preference. Whisper is still excellent and supported in transcribe.cpp
Cohere Transcribe is also excellent, but many of the new models are as well
I run the same, if you want try a simple filter post transcription to remove them, and while you're at it add some simple word replacements like 'cloud MD' to 'CLAUDE.MD'
> parakeet on a mac which transcribes all my uh's and aahs
You should be able to fix this by playing with the mic speech floor. It happens when to much ambient stuff slurps in.
It's actually gaslighting you, you don't say that many ums and ahs ;)
Thanks CJ, you've put some pretty cool things out there!
Excellent work CJ
Thanks :)
handy has been invaluable in my workflow, and having a fast, local, c++-based transcription library with first-party ts bindings is incredibleee
tysm for shipping this, keep up the great work OP
One thing I find that's missing a lot or at least I haven't come across other than commercial offerings like AquaVoice is a decent injected technical vocabulary so that the initial transcript requires minimum cleanup afterwards. Because I mostly use these tools to essentially ramble at the command line with coding agents. So there's a lot of technical terms that don't translate well. Like OpenBao comes out as open bowel sometimes,lol. That necessitates significant cleanup prompt or background text available to the cleanup llm, usually in the form of screenshot or something that gets converted to text but that in turn requires good hw for speed to be almost imperceptible. For example m5 max turns cleanup into a noticeable delay while 5090 is decent.
Only way I have found that's relatively easy to inject technical vocab is to use whisper, but limited, I think to about 220 or so tokens. Whisper has sort of like a priming prompt where one can put in a bunch of technical words and it will try to recognize those. But again, that's limited to small number tokens. And that limits one use a relatively slow, by today's standards, whisper.cpp.
I benchmarked it across a bunch of different hardware that I have available, and Whisper gives decent performance as far as speed goes only on a pretty top-end GPU, such as a 5090 or 4070, like for example on Strix Halo, it's still relatively slow for longer transcriptions because I prefer just a stream of consciousness ramblings for minutes and then that being transcribed and cleaned up versus short sentences. So in that scenario something like 5090 really is good because the cleanup prompt runs fast using usually Qwen 3.6 MOE model. Whisper on 4070 itself is about 0.7 seconds for two or three minute transcription. So the total wait time for a three-minute transcription is roughly a second, or a little bit more than a second, so totally acceptable. But it does take decent hardware, and it grows to be double that on if running totally local. Well, in my case, it's all local, but it's my own hardware all over the place, but truly running on laptop, it's much faster using Parakeet, but then the cleanup is the bottleneck.
Anyway, it's just my experience messing around with this for the last year. I did start using AquaVoice, but their speed was exceptional, and tech vocab was exceptional, but they would have some annoying delays occasionally, and I didn't like paying the money and sending sensitive topics and screenshots into the cloud, and I had hardware, so my local solution is basically almost as good as commercial one. But I think they train their own model. So what I'm doing is I collect all the samples of my transcriptions, and I am slowly building my own data set that hopefully at some point when I get energy I will find some way to fine tune something.
I've been using this one for a week for local transcription, working pretty well so far
Is there a way to add speaker identification easily?
Hey! It’s actually in progress right now, probably will come this week :)
That would be Diarize.cpp, not Transcribe.cpp.
Does this support filtering of “umm”,”err”, “ugh”, or that is nit yet possible with open source models?
Not in the library itself, it’s pure inference. Some models have this trained out of them anyhow. Otherwise this is a post processing task which is not really inference
So it looks like something that app would be doing, or run another model over the output to smoothen out and remove these things?
Yep, could do simple things like literal regex or all the way up to LLM cleanup, tons of options
thanks man! Been searching for solution like yours :)
Is transcription a form of _inference_ though? I mean I see the word being thrown around and I understand what it means (or at least I think I do) in context of LLMs doing the thing that they do -- intelligently predict the next token, but do speech-to-text models do that?
Speech-to-text models predict the next token of text from the preceding tokens of text and the current tokens of speech.
Thanks, I did some learning and it fell more into place.
three separate people in this thread independently remembered Dragon NaturallySpeaking and I think that is the funniest possible review of the state of speech recognition in 2026
Hey, thanks for this.
I don't suppose this works in the browser?
Out of the box no probably not, but if people are interested there’s probably ways forward
Absolutely interested
Excellent work
Another happy user of Handy here!
After seeing so many *subscription based* transcription apps all wrapping *open source models*, finding Handy was a real delight and I'm happy to see the author keep on building!
Has anybody experience with using this with strong dialects, like e.g. bavarian-family (German) based ones? Or other languages one too, as I'd figure basic behavior and approaches to improve detection of such is often similar in principle for dialect style variants of a language.
I mean, I naturally should try myself, and plan to do so, but slightly lower on my free time priority list and I figured someone else might have explored this already.
Nice - I'm definitely going to take a look at this. I've built my own cross-platform (Mac/Win/Linux) live captioning app on top of Nemotron, and it works well but dealing with ONNX is kind of annoying. With this having Rust support (I built it on Rust/Tauri) it should be a pretty solid candidate; I'll have to see if I can find a Silero VAD implementation that doesn't depend on ONNX, or maybe I'll see if the clankers can migrate it for me.
Have you published your app? I would love to take a look and test it
I have not formally published it, but it's open source: https://github.com/edmistond/larmindon and https://github.com/edmistond/larmindon-core - you'll want to clone them into the same root directory.
Right now it only supports languages supported by parakeet-rs and Nemotron (so... English only as far as I'm aware) and you'll need the ONNX version of Nemotron: https://huggingface.co/altunenes/parakeet-rs/tree/main/nemot...
The first run experience isn't great, you'll need to download all the files from the model, start the app, and then go to settings and configure the model directory. It runs well on Mac and Windows; I haven't tested it on Linux in a couple of months since my Linux install is out of commission currently.
Congrats on delivering good value to the people. I have used transcribe.cpp a few weeks ago to do near realtime offline stt on a 10 year old phone, writing simple adhoc app for my use case, it's crazy what is happening right now.
Ha amazing, love to hear it
I use Handy everyday. It’s a great project. Thank you for making offline ASR work great on modern machine.
Looks interesting, I'll give it a try. Though I'm really happy with faster-whisper on a GPU.
would love to see a demo handy is fantastic although its still behind the frontier models
Pretty sure I saw Handy using it; if you have the latest version, you’re probably already demoing it.
Yep the latest version has support! Virtually all of the SOTA open models are supported by Handy including the streaming ones like
Nemotron Streaming
Parakeet Unified
Voxtral Mini Realtime
If something you want is not supported, open an issue on transcribe.cpp!
author of the blogpost is the maintainer of Handy, so almost guaranteed!
I installed it but I don't think I see the streaming transcriptions. I do think the transcription is a bit faster. I am using the latest version.
You have to change the model to one that supports streaming. The latest parakeet does. I've been using it the last week or so. It's good stuff :)
Yet another happy user of Handy - one of the best applications out there, kudos! <3
Handy is an amazing cross-platform app for dictation from the author. There are other awesome open-source dictation tools as well like native macOS ones. You do not need SaaS subscription in this day and age for transcription.
I maintain this list of all the best open-source ones in this awesome-style GitHub repo. People looking for open-source dictation tools, hope you find something that works for you here:
https://github.com/primaprashant/awesome-voice-typing
Any that also support translation? How much harder/ easier of a problem is local translation compared to transcription?
If you're talking about translated text, then that should be super easy. Most of these dictation tool support post-processing with LLM to remove filler words, fix punctuation, etc. I'd imagine you can change the system prompt for the post-processing step to do the translation instead, and you'd get translated text.
Yea I’m looking local hosted transcription and translation with diarization of 2 (or more ) speakers. This is to speed up collaborative technical work between two teams who speak different languages where want all local processing (assume no cloud access).